Foam polishing pad that utilizes a 3M patented convoluted foam face. Reduced diameter loop attachment backing for added edge protection. Attaches to either backup pads part numbers 05717 or 05718. Fits all 5/8 inch shaft on slow speed polishers.
3M™ PPS™ Type H/O Pressure Cup is a pressurized (H/O) hard cup and collar set that supports and holds 3M™ PPS™ flexible liner used in the 3M™ Paint Preparation System. This product is intended for use in place of metal cups on most pressure spray guns.
3M PPS SUN GUN II Light Kit provides a light source that replicates natural sunlight, allowing technicians to better match interior and exterior paint colours.
SKU: N/A$35.00–$165.00Price range: $35.00 through $165.00 ex GST
Size: 18mm x 55m
3M™ Automotive Orange Masking Tape 211 is an economical, everyday-use masking tape that provides good adhesion to a variety of surfaces while offering clean removal. It features excellent conformability, easy handling, and controlled unwind. This tape is suitable for use with both waterborne and solvent-based paints.
SKU: 3M21136BOX$187.00Original price was: $187.00.$165.00Current price is: $165.00. ex GST
3M™ Automotive Orange Masking Tape 211 is an economical, everyday-use masking tape that provides good adhesion to a variety of surfaces while offering clean removal. It features excellent conformability, easy handling, and controlled unwind. This tape is suitable for use with both waterborne and solvent-based paints.
Size: 36mm x 55m
SKU: 3M21148BOX$151.00Original price was: $151.00.$140.00Current price is: $140.00. ex GST
Size: 48mm x 55m
3M™ Automotive Orange Masking Tape 211 is an economical, everyday-use masking tape that provides good adhesion to a variety of surfaces while offering clean removal. It features excellent conformability, easy handling, and controlled unwind. This tape is suitable for use with both waterborne and solvent-based paints.
The 3M™ Perfect-It™ Polishing Foam Pad is highly effective for blending out scratches, low speed buffing and intermediate sanding. As part of our 3M™ Perfect-It™ Paint Finishing System, the product enables more efficient polishing and achieves even better results.
Two-part epoxy used to repair most flexible plastic parts, including bumper covers and other plastic body panels. This product should NOT be used with SMC/fiberglass. This product is easy sanding and formulated for excellent featheredge
Provides protection against Organic Vapours (boiling point > 65ºC) (A1). Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels.
•3M™ Bayonet Connection System ensures precise and secure locking
•Low profile and well balanced twin filter design
•Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators
Best in class 3M™ Cubitron™ II File Belts for use with the 3M™ File Belt Sander as an improved control and ease-of-use alternative to spot weld drilling and many common body shop metal grinding applications.
3M precision shaped grain technology provides improved cut, a more consistent finish and two times more belt life while running cooler.
Designed specifically for use with the 3M™ Accuspray™ ONE Spray Gun System and the 3M™ PPS™ Series 2.0 Spray Cup System - our highest performing disposable spray cup system. Atomizing heads are available in 2.0 mm (red), 1.8 mm (clear), 1.4 mm (orange), 1.3 mm (green) and 1.2 mm (blue) for spraying of primer, sealer, base and clear coat All atomizing heads are interchangeable for use with 3M™ Accuspray™ ONE Spray Gun Size is presented clearly on each atomizing head for fast, accurate selection
Designed specifically for use with the 3M™ Accuspray™ ONE Spray Gun System and the 3M™ PPS™ Series 2.0 Spray Cup System - our highest performing disposable spray cup system. Atomizing heads are available in 2.0 mm (red), 1.8 mm (clear), 1.4 mm (orange), 1.3 mm (green) and 1.2 mm (blue) for spraying of primer, sealer, base and clear coat All atomizing heads are interchangeable for use with 3M™ Accuspray™ ONE Spray Gun Size is presented clearly on each atomizing head for fast, accurate selection
Designed specifically for use with the 3M™ Accuspray™ ONE Spray Gun System and the 3M™ PPS™ Series 2.0 Spray Cup System - our highest performing disposable spray cup system. Atomizing heads are available in 2.0 mm (red), 1.8 mm (clear), 1.4 mm (orange), 1.3 mm (green) and 1.2 mm (blue) for spraying of primer, sealer, base and clear coat All atomizing heads are interchangeable for use with 3M™ Accuspray™ ONE Spray Gun Size is presented clearly on each atomizing head for fast, accurate selection
Designed specifically for use with the 3M™ Accuspray™ ONE Spray Gun System and the 3M™ PPS™ Series 2.0 Spray Cup System - our highest performing disposable spray cup system. Atomizing heads are available in 2.0 mm (red), 1.8 mm (clear), 1.4 mm (orange), 1.3 mm (green) and 1.2 mm (blue) for spraying of primer, sealer, base and clear coat All atomizing heads are interchangeable for use with 3M™ Accuspray™ ONE Spray Gun Size is presented clearly on each atomizing head for fast, accurate selection
The 3M™ Accuspray™ HGP Spray Gun Kit features an HVLP gravity pressurized spray gun body built specifically for applying high viscosity fluids in collision repair. The kit includes an Accuspray™ HGP pressurized spray gun and two each of 1.8 mm and 2.0 mm atomizing heads that allow for full, consistent spray patterns and low overspray. The kit is ideal for use with Accuspray™ H/O Pressure Cups.
Durable, Lightweight Equipment for Applying Medium-Heavy Coatings
Designed for use with 3M™ PPS™ Type H/O Pressure Cups (sold separately) and featuring an Accuspray™ HGP spray gun body and replaceable atomizing heads, our 3M™ Accuspray™ HGP Spray Gun Kit contains the Accupsraytrade; equipment you need for efficient and effective application of high volume, high viscosity coatings in collision repair. This kit contains the lightweight HGP gun body, two 1.8 mm replaceable atomizing heads, two 2.0 mm replaceable atomizing heads and an air control valve.
•Nozzles mix a variety of 3M™ two-component products
•Use with all 3M™ 200 mL two-component cartridges
•Static mixing nozzles deliver high performance
•Highly recommended for automotive work
3M(TM) Automotive Refinish Masking Tape is designed to meet today's paint technicians requirements for masking before painting; no adhesive transfer; no edge lifting; waterbourne system compatible.
3M(TM) Automotive Refinish Masking Tape is designed to meet today's paint technicians requirements for masking before painting; no adhesive transfer; no edge lifting; waterbourne system compatible.