3M™ Flexible Foam is a soft and flexible two-part urethane material which foams in place (closed-cell foam). It is designed to replace OEM's flexible foams found on door intrusion beams, roof bows, inside body panels, pillars, and in other automotive body cavities. Expands to 10 times its original volumeto fill large cavities with a small amount of material. Can be used for OEM replacement of flexible foams to "pre-accident condition" as much as possible.
Designed for wet or dry sanding, 3M™ Grippy Sanding Cloth features a thin, flexible backing with a special gripping material that wraps around hand tools. It helps technicians maintain smooth and consistent contact to achieve more refined finishes, even on contoured or irregular surfaces which ultimately, ensures better productivity. The flexibility of the backing makes it easier to sand hard-to-reach areas.
Introducing new Hookit E-Coat Abrasive Discs engineered for new levels of performance and productivity on even the toughest e-coat primers. Our all new Hookit E-Coat Abrasive Disc is our toughest disc ever. Designed to cut through difficult to sand OEM e-coat primers, one disc can do the job of up to 10 standard discs - making panel keying quicker and easier.
•Designed for filling exterior automotive visual definition seams
•Heavy-based sealer is easily tooled and minimizes dripping and mess on vertical seams
•Applies right from the tube with no added time required for mixing
•Resists weather, water, oil and UV for durability
•Controlled shrinkage when curing makes for excellent visual definition seams
•Cured sealer accepts standard auto paint systems
Our 3M™ Heavy Drip-Chek™ Sealer is a heavy-based sealer specifically designed for filling exterior auto body definition seams including roof drip rails on older vehicles. Weather-resistant sealer is non-sagging – ideal for vertical seams – and adheres to metal, rubber, glass and painted surfaces. It can be applied up to 1/8” wide. Controlled shrinkage provides excellent visual definition seams.
Highlights
Helps reduce the use of cleaning solvents
Compatible for cleaning waterborne and solvent-based coatings
Aerosol cleaner is low VOC – less than 25 g/L (meets SCAQMD Rule 1171)
Designed for use on metal spray equipment or composite/plastic components
Excellent for cleaning spray gun equipment
•Engineered ceramic mineral blend provides best-in-class performance using exactly the right balance of ceramic grain and premium aluminum oxide
•Anti-loading coating improves disc life
•Upgraded resins improve durability and finish
•3M™ Hookit™ universal multi-hole pattern with alignment guide: Reduces loading for improved performance, Improves dust extraction efficiency compared to 6 and 7 hole patterns, Aligns with majority of dust extraction back-up pads
Dust extraction Hookit™ back up pad (Clean Sanding) is constructed on foam material. The backup pad itself has a 5/16-24 internal thread, and the kit includes five adaptors that convert it to 1/4-20 external threads, 1/4-20 internal threads, 1/4-28 external threads, 5/16-24 external threads, or 6mm-1.0 external threads.
Clean Sanding Disc Pad
Type Low Profile
Size 3 Inch
Thickness 1/2 Inch
Speed Rating 15000 RPM
Density Firm
Used with Finishing, Polishing, Surface Preparation
Color Red (Foam), Black (Face)
Thread Size 1/4 Inch-20 TPI (External)
Number of Dust Holes 3
High performance Aluminum Oxide cuts fast, lasts a long time, resists loading and leaves a consistent finish. Use these products with a soft interface pad to scuff sand before painting. Use them to remove runs, dust nibs and excess orange peel from topcoat finishes before repainting or buffing. Discs are easy to remove from backup pads. They are faster and easier to use than scuffing pads, and there's none of the dry time you get with wet sanding. Levels orange peel, dust nibs or paint runs in all types of automotive paints. Appropriate for light sanding on refinish lacquer.
Designed for fairing, shaping, sanding and finishing boats, plugs and molds. Durable, lightweight construction that combines worker comfort and getting desired results quickly.
Long-lasting abrasive disc produces easy-to-polish finish Specially formulated coating reduces pigtails and boosts abrasive life Flexible, durable film backing increases conformability Several hole designs available for better dust extraction
Long-lasting abrasive disc produces easy-to-polish finish Specially formulated coating reduces pigtails and boosts abrasive life Flexible, durable film backing increases conformability Several hole designs available for better dust extraction Hookit™ attachment system makes for fast, efficient disc change-outs Our 3M™ Hookit™ Purple Finishing Film Abrasive Disc 260L features an updated coating that levels surface defects on clear coat and greatly reduces pigtails. Aluminum oxide abrasive cuts fast, lasts a long time, resists loading with or without hole pattern designs and leaves a consistent, easy-to-polish finish. Our 3M™ Hookit™ attachment system makes disc change-outs fast and easy.
Our 3M™ Hookit™ Purple Finishing Film Abrasive Disc 260L features an updated coating that levels surface defects on clear coat and greatly reduces pigtails. Aluminum oxide abrasive cuts fast, lasts a long time, resists loading with or without hole pattern designs and leaves a consistent, easy-to-polish finish. Our 3M™ Hookit™ attachment system makes disc change-outs fast and easy. For a Better Finish, Start Here We built some of our latest discoveries into our 3M™ Hookit™ Purple Finishing Film Abrasive Disc 260L to help you achieve a consistent, professional and easy-to-polish finish with reduced pigtails during dry sanding. Our 3M™ Hookit™ Purple Finishing Film Abrasive Discs 260L are built onto a durable film backing that adds conformability, and our specially formulated coating preserves the life of the aluminum oxide mineral.
Long-lasting abrasive disc produces easy-to-polish finish
Specially formulated coating reduces pigtails and boosts abrasive life
Flexible, durable film backing increases conformability
Several hole designs available for better dust extraction
Hookit™ attachment system makes for fast, efficient disc change-outs
Our 3M™ Hookit™ Purple Finishing Film Abrasive Disc 260L features an updated coating that levels surface defects on clear coat and greatly reduces pigtails. Aluminum oxide abrasive cuts fast, lasts a long time, resists loading with or without hole pattern designs and leaves a consistent, easy-to-polish finish. Our 3M™ Hookit™ attachment system makes disc change-outs fast and easy.
Improved Performance
3M™ Hookit™ Purple Finishing Film Discs were developed as a direct response to our customers’ requests for a long-lasting abrasive disc that produces fewer pigtails with the same easy-to-polish finish.
50per box