3M – Page 8 – Smash Supplies

“3M Sponge Sanding Pads Superfine – (500 – 600 grit)” has been added to your cart. View cart

3M Sponge Sanding Pads Sfine - (500 - 600 grit)

3M Sponge Sanding Pads Fine – (320 – 400 grit)

SKU: 3M03809 $75.00 ex GST

FINE: equivalent to 320 to 400 for primer sanding & new panel preparation. 115mm * 140mm 20 Per Box

Add to compare

3M Sponge Sanding Pads Superfine – (500 – 600 grit)

SKU: 3M03810 $75.00 ex GST

3m super fine hand pads 20 per box

Add to compare

3M Spraying Respirator Kit A1P2

SKU: 3M6251 $158.00 ex GST

The 3M Spraying Respirator Starter Kit is a simple, lightweight design that provides protection from vapours and fumes when used for painting, pesticide spraying, chemical vapours and fumes from solvents.

Add to compare

3M Static Mixing Nozzles 50ml 12 Nozzles

SKU: TM3M38195 $28.00 ex GST

Static mixing nozzle for use with manual and pneumatic applicators

Nozzle mixes a wide variety of 3M two component adhesives, sealers, and foams

Components automatically mix to the ideal, effective ratio

Add to compare

3M Stikit Blue Abrasive Speedfile Roll 80g 70mm x 9m

SKU: 3M36217 $70.00 ex GST

The 3M Stikit Blue Abrasive Sheet Rolls delivers best-in-class performance at every stage of paint preparation and body repair. Premium aluminium oxide mineral is blended with ceramic grain for a full range of automotive sanding applications.

Add to compare

3M Super Fast Plastic Repair 200ML

SKU: 3M4247 $105.00 ex GST

3M4247 is a two-component adhesive that has a very fast gel and cure time. The two parts consist of a base side and an accelerator side. The two parts are always mixed together.

Add to compare

3M Super-Fast Repair Adhesive, Amber, 47.3 mL

SKU: 3M4747 $60.00 ex GST

•Extremely fast-setting adhesive for rapid bonds and quick results •Repair adhesive will not run or sag allowing for accuracy during application •Adhesive offers excellent wide-gap filling capabilities •Formulated for resilience to withstand a wide range of temperatures

Add to compare

3M Superbuff Adaptor

SKU: 3M5710 $49.00 ex GST

Adaptor for the 3M™ Superbuff™ Buffing Pads. Works with 3M™ Perfect-It™ Backup Pad. 5/8" Shaft

Add to compare

3M Tack Cloth Aqua Pkt 10

SKU: 3M50401 $34.60 ex GST

A tack cloth with light adhesive, ideal for use in the spray booth prior to final coat application. Removal of lighter dust from fine sanding, light overspray from basecoats and final cleaning of air dried waterbased coats prior to clearcoat application.

Add to compare

3M Trim Masking Tape 6349

SKU: 3M06349 $80.00 ex GST

Our 3M™ Trim Masking Tape lifts and protects trim moldings during auto body masking, eliminating overspray and visible paint edges. A rigid band along one edge slips gently behind the molding, lifting slightly from the body. Paint flows under the molding while its exterior stays masked for a professional, finished paint job without removing or replacing the moldings or rework for paint lines.

http://www.youtube.com/watch?v=BsP0-wqpq68

Add to compare

3M Trizact 1500 Hookit Clearcoat Disc 76mm

SKU: 3M2094 $62.00 ex GST

Patterned, precise mineral structures give Trizact™ abrasives the combination of fast cut and consistent finish every time. Use P1000 foam blending discs for scuff sanding blend panels prior to painting. Use P1500 clearcoat sanding discs for leveling dust nibs and sanding of mismatched orange peel. Finally, use P3000 foam disc for removing P1200-P1500 grade sand scratches prior to use of 3M™ Perfect-It™ polishing system. Use to level minor dust nibs and for light sanding of mismatched orange peel on all automotive paints. Our exclusive abrasive provides a uniform and consistent finish.

Add to compare

3M Trizact 3000 Hookit Foam Disc 76mm

SKU: 3M2087 $62.00 ex GST

Trizact, P3000 Foam Disc is a foam sanding disc used in a spot repair system for removing P1200-P1500 grade sand scratches prior to using 3M Perfect-It 3000 Panel Repair System.

Add to compare

3M Trizact Blending Abrasive 5000 Grit Disc 76mm

SKU: 3M30362 $65.00 ex GST

Patterned, precise mineral structures give Trizact™ abrasives the combination of fast cut and consistent finish every time. Use P1000 foam blending discs for scuff sanding blend panels prior to painting. Use P1500 clearcoat sanding discs for levelling dust nibs and sanding of mismatched orange peel. Finally, use P3000 foam disc for removing P1200-P1500 grade sand scratches prior to use of 3M™ Perfect-It™ polishing system. Foam Trizact™ disc for use in scuff sanding blend panels before painting. Use with Hookit™ 15 cm Pad 05551, and Hookit™ Soft Interface Pad 05777.

Add to compare

3M Trizact Hookit Clear Coat Sanding Discs P1500 150MM

SKU: 3M2088 $130.00 ex GST

Designed for use in scuff sanding before painting, as well as to remove runs, dust nibs and excess orange peel from paint and gelcoat prior to compounding. Cuts fast, lasts long, resists loading and leaves a consistent finish.

Add to compare

3M Trizact Hookit Disc 150mm 1000 – 3000 – 5000 Grit

SKU: 3MTD150ML ex GST

Trizact is a Foam sanding disc used in a spot repair system adequate for removing P1200-P1500 grade sanding scratches. Available in 1000 - 3000 - 5000 Grit

Add to compare

3M Unitized Wheel 76mm

SKU: 3M9743 $20.00 ex GST

Strong unitized construction provides effective edge deburring and finishing. Hard densities offer good edge retention, which helps maintain consistent shape and cutting action. Compressed, open-web construction and uniform grain distribution provide consistent cutting action.

Add to compare

3M VHB 4941 Tape 24mmX33m Grey – 1.1mm Thick

SKU: 3M494124MM $235.00 ex GST

Fast and easy-to-use permanent bonding method provides high strength and long-term durability Excellent temperature resistance of 230°C (450°F) for up to 4 hours Virtually invisible fastening keeps surfaces smooth

Add to compare