Cartec Overspray Removable Clay
SKU: CCBF $105.00 ex GST
CLAY BAR is a non abrasive product, designed to remove over spay from contaminated surfaces , including Glass and chrome, easy and quickly without damaging surfaces. Ideal for the removal of over spray, road dust, industrial fall down, tree dropping and oxidation from acid rain. Leaves surfaces smooth and contamination free.
Cartec Panel Spray 1lt
SKU: CPS1 $48.00 ex GST
Panel Spray is a unique panel wipe which is used before, in between and after each polishing stage to ensure that there are no compound residues, silicones, solvents or unseen paint contaminants in the paint.
Unlike other panel wipes or IPA alcohols, which usually only dilute any contaminants and move them around, Panel Spray's special formula completely removes them with one quick use.
Includes a trigger.
Cartec Pressure Pump sprayer
SKU: CPP2 $80.00 ex GSTHigh quality pump with viton seals is chemical and solvent resistant. Adjustable nozzle, maximum presure 44psi. Also suitable for acid
Cartec Refinish 12000 1Lt
SKU: CTF12000 $85.00 ex GST
Is an ultra-fine polishing product based on unique micro-abrasive technology and high quality oils. Finish 12000 is designed for use after Compound 4800 and leaves the surface with an extremely deep gloss, totally swirl free without any holograms. Finish 12000 to be used without water, by hand or machine for a high gloss.
.
Cartec Refinish Compound 5000 1Lt
SKU: CTC5000 $95.00 ex GST
Compound 500 is a silicone-free paint renovator with fast cutting action and high gloss,hologram free finish. It is ideal for rectifying polluted, oxidised and dull paints. It quickly removes paint defects scratches (P1500), runs, orange peel and overspray. No water is needed due to compound 5000's self-lubricating formula. This compound does not contain any fillers or silicone and is amonia free. After compound 5000we recomend the final cut 9000 and/or ultra finish 1200 for best finish
Cartec WaxCoat 1lt
SKU: CTWC1LT $92.00 ex GST
WaxCoat provides an additional protection after the polishing process with Compound 4800 and Finish 12000. WaxCoat gives a very deep shine and an extremely smooth surface. WaxCoat has minimal polishing action. It is manually applied to the paint surface. WaxCoat is very easy to apply and to remove. Hologram and Silicone FREE
Cartec White Medium Finishing Pad 150mm X 30mm Single
SKU: CFPWF150 $38.00 ex GST
Cartec Refinish PRO pads have been made with new technology. These pads perform the cutting process 15% quicker than conventional compound pads which are thicker in width. The ultra slim design, means less heat is created within the pad itself, allowing more air to flow through, which provides a longer pad life.
Combining this pad with Cartec’s Final Cut 9000 gives you an excellent end result. It is a medium polishing foam that is used for light polishing and glossing of lacquered surfaces. The ‘smart’ design of this pad ensures that less heat enters the pad, resulting in more effective polishing.
Cartec White Medium Finishing Pad 160 X 12mm Single
SKU: CTFPW160X12MM $38.00 ex GSTThis pad in combination with the Final Cut 9000 ensures a brilliant result. It is a medium polishing pad, which can be used for light polishing and bringing shine to paint surfaces.
Cartec Yellow Foam Pad 150mm X 30mm Single
SKU: CTYFP150MM $38.00 ex GSTThe 150mm compound pad is an aggressive polishing sponge. It is designed to cut through medium to heavy surface marks and swirls. This firm foam pad will work well on moderate and heavy oxidation along with pitted finishes, and will remove wet sanding scratches with ease. For the removal of P1500 sanding marks. Sold single
Cartec Yellow Foam Pad 160X12mm Single
SKU: CTFPO160X12MM $38.00 ex GST
This polishing pad was specially developed for the combination with Compound 5000. The end result of this is excellent.
Cello Recycle Sankraft Masking Paper 450mm x 400M
SKU: CRP18 $45.00 ex GST
Cello Recycle Sankraft Masking Paper 450mm x 400M
Cello's Brown Masking Paper can be used to protect floors, windows, doors and any large area from paint overspray.
Cello Semi – Wax Masking Paper 400mm x 450mm
SKU: CSWP18 $60.00 ex GST
Cello 450 natron ribbed kraft masking Paper 18"
Charge Pack A/C Adapter for ES1224
SKU: ESA-31 $105.00 ex GST12 V Charger suitable for porta power ES1224 & ES3500
Clay Mitt
SKU: V002 $65.00 ex GST
Clay Mitt is a fast, easy way to remove above surface contaminants from you paint and glass. Clay Mitt is constructed from a high strength microfibre with one side finished in a high-tech rubber polymer coating that removes surface contaminants EG: paint overspray, bugs, tar, train brake dust and industrial fall out. The mitt design ensures you have a secure grip and we think it provides a more even hand pressure than the cloth version.