Features & Benefits
Self levelling properties eliminate pinholes and small imperfections, ideal for filling stonechips.
Provides the perfect surface for painting with minimal sanding required.
This revolutionary space aged tintable urethane based protective coating. Protect any surface with any color! Color Your Hippo is a versatile coating and can be use to protect Truck Beds (replaces drop-in plastic liners), Trailers, Boats, Off-Road Vehicles, RVs, fences, decks, lawn furniture and almost anything that requires durability at a Down-to-Earth price. This rugged colored protective coating not only looks good but it protects surfaces against a wide range of extreme conditions and extends longevity of almost any surface.
KIT CONTAINS- Approximately 2 Quarts or 0.45 Gallon total, which is enough for a small truck standard short bed. Two kits required for a complete full size short or long bed. Also includes Gloves. Practical Coverage: 50-55 sq. ft per 0.45 gal. at 10-12 mils.
MATERIALS NEEDED -Additional materials required: sand paper (120-220 grit), mixing stick, masking tape and masking paper and/or plastic. - Depending on method of application you will need: A Brush, Roller or Schutz Style Gun (Dominion Sure Seal part # BUPA). If spraying you will also need a schutz style can (Dominion Sure Seal part # CC32M) to attach to the schutz style spray gun and an air compressor capable of delivering a constant pressure of between 50 and 60 PSI (at the gun).
GENERAL INFORMATION - Do not apply in extreme cold or hot temperatures. Ideal application - temperature is 72 degrees F (20 degrees C) with humidity of less than 60% - Wear gloves (included in kit) - Do not expose Color Your Hippo to water for up to 24 hours at 72 degrees F(20 degrees C.) - Do not put heavy loads on the surface until the material is fully cured
Mix and use product in a well ventilated area. Use appropriate respiratory protection.
SKU: TDSRF$135.00Original price was: $135.00.$85.00Current price is: $85.00. ex GST
JTAPE Door Skin Replacement Foam is a foam backed foil to easily replace the inner door membrane during repairs. Door Skin Replacement Foam has a grid-pattern printed on the release liner to aid cutting out intricate shapes.
Features and Benefits.
Saves significant time and cost in skinning doors.
Faster than any other method available.
Factory results in one pass.
one hand operation
Specifications - Pressure Ratio: 1:1 - Painting Tank Volume: 4 ~ 200 Litres - Transmitting Capacity: 5L / Min (0.4 kg / cm2), 7.5L / Min (1 kg / cm2), 10.5L / Min (2 kg / cm2) - Used Air Pressure: 1 ~ 5 kg / cm2 - Maximum Painting Pressure: 160 times / min (5 kg / cm2) - Maximum Pump Speed: 160 times / min (5 kg / cm2) - Minimum Pump Speed: 80 times / min (0.4 kg / cm2)
Double Side 4PLY Wool Pad
For extra performance and quality, A medium to heavy cut with 4 PLY wool, Flexible and conforms to un-even surfaces during buffing.