Sprayable and Color Tintable Bed Liner Kit
This revolutionary space aged tintable urethane based protective coating. Protect any surface with any color! Color Your Hippo is a versatile coating and can be use to protect Truck Beds (replaces drop-in plastic liners), Trailers, Boats, Off-Road Vehicles, RVs, fences, decks, lawn furniture and almost anything that requires durability at a Down-to-Earth price. This rugged colored protective coating not only looks good but it protects surfaces against a wide range of extreme conditions and extends longevity of almost any surface.KIT CONTAINS- Approximately 2 Quarts or 0.45 Gallon total, which is enough for a small truck standard short bed. Two kits required for a complete full size short or long bed. Also includes Gloves. Practical Coverage: 50-55 sq. ft per 0.45 gal. at 10-12 mils.MATERIALS NEEDED -Additional materials required: sand paper (120-220 grit), mixing stick, masking tape and masking paper and/or plastic. - Depending on method of application you will need: A Brush, Roller or Schutz Style Gun (Dominion Sure Seal part # BUPA). If spraying you will also need a schutz style can (Dominion Sure Seal part # CC32M) to attach to the schutz style spray gun and an air compressor capable of delivering a constant pressure of between 50 and 60 PSI (at the gun).GENERAL INFORMATION - Do not apply in extreme cold or hot temperatures. Ideal application - temperature is 72 degrees F (20 degrees C) with humidity of less than 60% - Wear gloves (included in kit) - Do not expose Color Your Hippo to water for up to 24 hours at 72 degrees F(20 degrees C.) - Do not put heavy loads on the surface until the material is fully curedMix and use product in a well ventilated area. Use appropriate respiratory protection.Price per door stand.
Avaliable now in flat pack for easy transportation.
Specifications - Pressure Ratio: 1:1 - Painting Tank Volume: 4 ~ 200 Litres - Transmitting Capacity: 5L / Min (0.4 kg / cm2), 7.5L / Min (1 kg / cm2), 10.5L / Min (2 kg / cm2) - Used Air Pressure: 1 ~ 5 kg / cm2 - Maximum Painting Pressure: 160 times / min (5 kg / cm2) - Maximum Pump Speed: 160 times / min (5 kg / cm2) - Minimum Pump Speed: 80 times / min (0.4 kg / cm2)
