Cartec 4800 Refinish Compound 3Kg
SKU: CT4800 $110.00 ex GST
Compound 4800 is a silicon-free paint renovator with fast cutting action and a high gloss finish.
It quickly removes painting defects such as deep scratches (P1500), runners/sags, orange peel and overspray.
No water is needed for processing.
Built in lubricants avoid product drying on the pad.
Cartec Diamond Cut 3000 1lt
SKU: CRDC3000 $180.00 ex GST
Diamond Cut 3000
By far the best cutting compound in the world
Diamond Cut is an extreme cutting compound with a speed ability to bring up gloss almost instantly, even on ceramic and scratch resistance clear coat, gel coats and any other surface in unbelievable time.
Diamond cut 3000 will save you real time with real instant results.
Diamond Cut 3000 contains special lubricant to assist cutting cycle for an immediate high gloss, for best performance, use with original specially designed pad, Green pad designed to soften as it generates heat for an immediate clean up cycle second's after cutting.
Cartec Dispenser Compound 4800 Paste Tub
SKU: RF3130 $80.00 ex GSTA dispenser which is especially developed for the Compound 4800 Paste 3kg packing. The dispenser keeps the compound from drying. Furthermore the closed packing prevent that the compound can be contaminated with dust or other kinds of pollution.
Cartec Final Cut 9000 1lt
SKU: CRFC9000 $129.00 ex GST
A high precision final cutting compound, removes fine scratches, swirl marks, buffing marks and smudginess from surfaces.
A superb results when in need of a high precision gloss required.
Cartec Green Coarse Pad 150mm X 30mm Single
SKU: CCPGC150 $38.00 ex GST
Cartec Refinish PRO pads have been made with new technology. These pads perform the cutting process 15% quicker than conventional compound pads which are thicker in width. The ultra slim design means less heat is created within the pad itself, allowing more air to flow through. This provides a longer pad life and more efficiency.
In combination with Cartec Diamond Cut 3000, the effect of this pad is extremely effective. The coarse polishing foam is ideal for polishing paint surfaces with (deep) scratches and the ‘smart’ design ensures that less heat enters the pad, resulting in more effective polishing.
Cartec Green Polishing Pad Single 160mm X 12mm
SKU: CTGFP160MMX12 $38.00 ex GSTn combination with the Diamond Cut 3000, the effect of this polishing sponge is sublime. The pad has a coarse structure. This is ideal for polishing paint surfaces with (deep) scratches.
Cartec Micro Fiber Cloths Pkt5
SKU: CTMFC $45.00 ex GSTThis mammoth mountain of microfibres gives you the power to make sure that every detail is done right.
Cartec Overspray Removable Clay
SKU: CCBF $105.00 ex GST
CLAY BAR is a non abrasive product, designed to remove over spay from contaminated surfaces , including Glass and chrome, easy and quickly without damaging surfaces. Ideal for the removal of over spray, road dust, industrial fall down, tree dropping and oxidation from acid rain. Leaves surfaces smooth and contamination free.
Cartec Panel Spray 1lt
SKU: CPS1 $48.00 ex GST
Panel Spray is a unique panel wipe which is used before, in between and after each polishing stage to ensure that there are no compound residues, silicones, solvents or unseen paint contaminants in the paint.
Unlike other panel wipes or IPA alcohols, which usually only dilute any contaminants and move them around, Panel Spray's special formula completely removes them with one quick use.
Includes a trigger.
Cartec Pressure Pump sprayer
SKU: CPP2 $80.00 ex GSTHigh quality pump with viton seals is chemical and solvent resistant. Adjustable nozzle, maximum presure 44psi. Also suitable for acid
Cartec Refinish 12000 1Lt
SKU: CTF12000 $85.00 ex GST
Is an ultra-fine polishing product based on unique micro-abrasive technology and high quality oils. Finish 12000 is designed for use after Compound 4800 and leaves the surface with an extremely deep gloss, totally swirl free without any holograms. Finish 12000 to be used without water, by hand or machine for a high gloss.
.
Cartec Refinish Compound 5000 1Lt
SKU: CTC5000 $95.00 ex GST
Compound 500 is a silicone-free paint renovator with fast cutting action and high gloss,hologram free finish. It is ideal for rectifying polluted, oxidised and dull paints. It quickly removes paint defects scratches (P1500), runs, orange peel and overspray. No water is needed due to compound 5000's self-lubricating formula. This compound does not contain any fillers or silicone and is amonia free. After compound 5000we recomend the final cut 9000 and/or ultra finish 1200 for best finish
Cartec WaxCoat 1lt
SKU: CTWC1LT $92.00 ex GST
WaxCoat provides an additional protection after the polishing process with Compound 4800 and Finish 12000. WaxCoat gives a very deep shine and an extremely smooth surface. WaxCoat has minimal polishing action. It is manually applied to the paint surface. WaxCoat is very easy to apply and to remove. Hologram and Silicone FREE
Cartec White Medium Finishing Pad 150mm X 30mm Single
SKU: CFPWF150 $38.00 ex GST
Cartec Refinish PRO pads have been made with new technology. These pads perform the cutting process 15% quicker than conventional compound pads which are thicker in width. The ultra slim design, means less heat is created within the pad itself, allowing more air to flow through, which provides a longer pad life.
Combining this pad with Cartec’s Final Cut 9000 gives you an excellent end result. It is a medium polishing foam that is used for light polishing and glossing of lacquered surfaces. The ‘smart’ design of this pad ensures that less heat enters the pad, resulting in more effective polishing.
Cartec White Medium Finishing Pad 160 X 12mm Single
SKU: CTFPW160X12MM $38.00 ex GSTThis pad in combination with the Final Cut 9000 ensures a brilliant result. It is a medium polishing pad, which can be used for light polishing and bringing shine to paint surfaces.
Cartec Yellow Foam Pad 150mm X 30mm Single
SKU: CTYFP150MM $38.00 ex GSTThe 150mm compound pad is an aggressive polishing sponge. It is designed to cut through medium to heavy surface marks and swirls. This firm foam pad will work well on moderate and heavy oxidation along with pitted finishes, and will remove wet sanding scratches with ease. For the removal of P1500 sanding marks. Sold single
Cartec Yellow Foam Pad 160X12mm Single
SKU: CTFPO160X12MM $38.00 ex GST
This polishing pad was specially developed for the combination with Compound 5000. The end result of this is excellent.